Exmark Viking Mower Deck Parts
Parts that fit Exmark Viking Decks
Mill Supply carries a variety of different kinds of parts that fit Exmark Viking decks. To find out more about each individual part, click the picture or the box showing that part and you will be taken to that parts detail page. Most orders placed before 4 p.m. EST are shipped same day so make sure you order now to get your parts as fast as possible!
1/4" BLADE SPACER.
Blade Spacer, 5/8"ID, 1"OD, 1/4"Height
18" FLAT, NO LIFT BLADE SHARPENED ALL 4 SIDES
18"x2.5"x.204" Flat Blade, Sharpened all 4 sides, 5/8" center hole dia. No Lift
5"X2-3/4" DECK WHEEL FITS EXMARK 603299
Deck Wheel that fits Lawn-Boy, 5" x 2-3/4", 5/8" ID, 2-3/4" Width, 5" Height, 2-1/2" offset hub. Uses bushing 8586.
BEARING, ID1xOD2-7/16x21/32H
Sealed bearing, 2-7/16"O.D., 63/64"I.D., 21/32"H.
BELT, 51-29/32"L
Engine to Blade belt, Exmark that fits 48" deck models, laminated Aramid fiber construction. Belt dim: 5/8" x 51-29/32".
BLADE, 18"L X 2-1/2"W
Commercial Mulcher Blade. 18"Lx2-1/2"W. Hole 5/8" .204" Thick.
BLADE, 18"L X 2-1/2W
Standard Blade. Use (2) blades for 36" cut; (3) blades for 54" cut. 18"Lx2-1/2"W. Center Hole 5/8". Outside Hole 1/4". Ctr to Ctr 1-5/8" .150" Thick
BUSHING, 1-1/8"OD 1-1/4"H
Caster yoke support are bushing that fits Exmark. 7/8"ID, 1-1/8"OD, 1-1/4". Flange 1-1/2". Replaces 1-303514.
CASTER YOKE SPACER
Caster Yoke Spacer. ID 7/8", OD 1-1/2", 1/2" thick.
COMMERCIAL MULCHER BLADE 16.25
Commercial Mulcher Blade. 16-1/4"Lx2-1/2"W. Hole 5/8" .204" Thick.
LOW LIFT BLADE
Low lift blade, 18"L x .204" thickness. Uses 3 blades for 52" cut.
PREMIUM BELT 5/8"Wx56"L
Premium Belts. 5/8" (15.88 mm) 56"L,Belt# 5L560
PREMIUM BELT 5/8"Wx90"L
Premium Belts. 5/8" (15.88 mm) 90"L,Belt# 5L900
SPINDLE ASSEMBLY
Spindle Assembly. For 32" and 36" decks. (short shaft).
SPINDLE ASSEMBLY
Spindle Assembly. For 48" decks. (long shaft).
SPINDLE HOUSING ONLY
Spindle housing that fits Bobcat, Bunton, Exmark, Snapper.
REPLACES 31002B
SPINDLE SHAFT ONLY
Spindle Shaft 6-1/4" For 48" decks. (long shaft).
STANDARD BLADE 16-1/4"L X 2-1/2"W
Standard blade, 16-1/4"L x 2-1/2"W x .204 thick, 5/8" center hole, uses 3 blades for 48" cut, fits Turf Tracer, HP Metro & Viking units.
WHEEL ASSEMBLY
Wheel assembly with puncture proof tire, 4" center hub with 3/4" open cage roller bearing & zerk fitting.
Mower-parts.net carries replacement Lawn Mower Deck Parts that fit Exmark Lawn Mowers and other Lawn Mower Parts. We feature Viking Mower Deck Parts.