61in | 72in Mower Decks That Fit Scag Mowers
Deck Parts that fit Scag Mowers
Mill Supply carries a variety of different kinds of belts that fit Scag mowers. To find out more about each individual deck part, click the picture or the box showing that part and you will be taken to that parts detail page. Most orders placed before 4 p.m. EST are shipped same day so make sure you order now to get your parts as fast as possible!
1" SNAP RING. FOR 1210
Snap Ring 1" For 1210
21" FLAT, NO LIFT BLADE SHARPENED ALL 4 SIDES
21"L x 2-1/2"W x .204 Flat Blade, Sharpened all 4 sides, 5/8" center hole
21" LOW-LIFT BLADE SHARPENED ALL 4 SIDES
21"x2"x.240 Low lift blade, 5/8"center hole dia. Sharpened all 4 sides.
9 X 350 X 4 CASTER WHEEL
Caster Wheel Assembly. 9x350x4 smooth tread 4-ply tubeless tire. 4" centered 3-piece rim, zerk fitting and a 5/8" open cage roller bearing, Uses our 09-5812 and 09-7780 bearing kit. (orange).
9 X 350 X 4 TUBE, 90 DEG VALVE
Tubes. Have a 90 degree valve stem (turned with rim). 9x350x4
BEARING, 2-7/16"ODX21/32"H
Spindle bearing that fits Scag. 63/64"ID, 2-7/16"OD, 21/32". Used on spindle 5722. Bearing No. 6305-Z, seals one side.
BLADE BOLT.
Blade Bolt, 5/8" x 11" overall length
BLADE, 24"L X 2-1/2"W
Blade, 24-1/2"Lx2-1/2"W. Hole 5/8" .204" Thick (3) blades for 72" cut.
BUSHING
Support arm bushing that fits Scag, 7/8"ID, 1-1/8"OD, 1", flange OD 1-1/2". Used on 8189 support arm.
BUSHING, 4"L ID 1/2"
Wheel bushing that fits Scag. 1/2"ID, 5/8"OD, 4". Used in wheel bearing assembly 5812.
CASTER SUPPORT ARM
Caster support arm
CASTER YOKE
Caster Yoke. 4-1/8" - Shaft Diam. 7/8". Hole 1/2". 6-7/16"x6". Hole 15/32".
CASTER YOKE SPACER
Caster Yoke Spacer. ID 7/8", OD 1-1/2", 1/2" thick.
COMMERCIAL MULCHER BLADE 21"
Commercial Mulcher Blade. 21"Lx2-1/2"W. Hole 5/8".
KEVLAR BELTS 5/8"Wx88"L
Aramid Fiber Cord Belts. 5/8" (15.88 mm) 88"L,B085 Series
LYNCH PIN.
Lynch Pin.
MOWER BLADE 21" LONG
Blade, 21"Lx2-1/2"W. Hole 5/8" .204" Thick.
MULCHING BLADE
Mulching blade, 24-1/2"L x 2-1/2"W x .204 thick, 5/8" center hole.
PREMIUM BELT 5/8"Wx94"L
Premium Belts. 5/8" (15.88 mm) 94"L,Belt# 5L940
SHAFT, SPINDLE
Spindle Shaft Only. ID 5/8". OD 1". Length 1/16". Keyway 1/4".
SPINDLE ASSEMBLY
Spindle Assembly that fits Scag, 7-3/16". Replaces 48626.
SPINDLE PULLEY W/TAPERED HUB
Spindle Pulley with taper hub. ID 1-1/16". OD 5-3/4". Hgt. 1-3/16".
Mower-parts.net is your complete resource for quality replacement Mower Decks that fit Scag mowers as well as other Scag Mower Parts.