Mower Decks That Fit Scag Decks 36in | 48in | 52in | 61in)
Deck Parts that fit Scag Mowers
Mill Supply carries a variety of different kinds of belts that fit Scag mowers. To find out more about each individual deck part, click the picture or the box showing that part and you will be taken to that parts detail page. Most orders placed before 4 p.m. EST are shipped same day so make sure you order now to get your parts as fast as possible!
1" SNAP RING. FOR 1210
Snap Ring 1" For 1210
18" FLAT, NO LIFT BLADE SHARPENED ALL 4 SIDES
18"x2.5"x.204" Flat Blade, Sharpened all 4 sides, 5/8" center hole dia. No Lift
18" LOW-LIFT BLADE SHARPENED ALL 4 SIDES
18"x2"x.240" Low-Lift Blade, Sharpened all 4 sides, 5/8" center hole dia. Low-Lift
9 X 350 X 4 CASTER WHEEL
Caster Wheel Assembly. 9x350x4 smooth tread 4-ply tubeless tire. 4" centered 3-piece rim, zerk fitting and a 5/8" open cage roller bearing, Uses our 09-5812 and 09-7780 bearing kit. (orange).
9 X 350 X 4 TUBE, 90 DEG VALVE
Tubes. Have a 90 degree valve stem (turned with rim). 9x350x4
BEARING, ID1xOD2-7/16x21/32H
Sealed bearing, 2-7/16"O.D., 63/64"I.D., 21/32"H.
BLADE BOLT.
Blade Bolt, 5/8" x 11" overall length
BLADE SPACER FOR SCAG
Blade spacer. ID 5/8". OD 1-1/2". Thickness 1/4".
BLADE, 16-1/2"L X 3"W
Blade, 16-1/2"Lx3"W. Hole 5/8" .204" Thick. (3) blades for 48" cut.
BLADE, 18"L X 2-1/2"W
Commercial Mulcher Blade. 18"Lx2-1/2"W. Hole 5/8" .204" Thick.
BUSHING
Support arm bushing that fits Scag, 7/8"ID, 1-1/8"OD, 1", flange OD 1-1/2". Used on 8189 support arm.
BUSHING, 4"L ID 1/2"
Wheel bushing that fits Scag. 1/2"ID, 5/8"OD, 4". Used in wheel bearing assembly 5812.
CASTER SUPPORT ARM
Caster support arm
CASTER YOKE
Caster Yoke. 4-1/8" - Shaft Diam. 7/8". Hole 1/2". 6-7/16"x6". Hole 15/32".
CASTER YOKE SPACER
Caster Yoke Spacer. ID 7/8", OD 1-1/2", 1/2" thick.
COMMERCIAL MULCHER BLADE 16.5"
Commercial Mulcher. 16-1/2"Lx2-1/2"W. Hole 5/8" .204" Thick
CUTTER DECK BELT
Cutter Deck Belt, Scag that fits 36" cut belt drive walk behind "B" section belt. Covered. Belt dim: 82"L.
ENGINE TO BLADE BELT
Engine to Blade, Scag that fits 48" cut mid mowers, "B" section belt *Aramid fiber construction. Covered. Belt dim: 89.6"L.
HIGH LIFT MOWER BLADE 18" LONG
Blade, 18"Lx3"W. Hole 5/8" .204" Thick. (2) blades for 36"cut. (3) blades for 52" cut.
KEVLAR BELTS 5/8"Wx53"L
Aramid Fiber Cord Belts. 5/8" (15.88 mm) 53"L,B050 Series
KEVLAR BELTS 5/8"Wx63"L
Aramid Fiber Cord Belts. 5/8" (15.88 mm) 63"L,B060 Series
KEVLAR BELTS 5/8"Wx93"L
Aramid Fiber Cord Belts. 5/8" (15.88 mm) 93"L,B090 Series
KEVLAR CORD BELT 56" LONG
Aramid Fiber Cord Belts. 5/8" (15.88 mm) 56"L,B053 Series
LYNCH PIN.
Lynch Pin.
MOWER BLADE 16.5"
Blade, 16-1/2"Lx2-1/2"W. Hole 5/8" .204" Thick. (3) blades for 48" cut.
MOWER BLADE 18" LONG
Blade, 18"Lx2-1/2"W. Hole 5/8" .204" Thick. (2) blades for 36" cut. (3) blades for 52" cut.
MULCHING BLADE, 18"L X 2-1/2"W
Mulching blade, 18"L x 2-1/2"W x .204 thick, 5/8" center hole.
PUMP DRIVE BELT
Pump Drive Belt, Scag that fits Turf Tiger models. *Aramid cord, laminated, raw edge belt. Belt dim: 1/2" x 79-13/16".
SHAFT, SPINDLE
Spindle Shaft Only. ID 5/8". OD 1". Length 1/16". Keyway 1/4".
SPINDLE ASSEMBLY
Spindle Assembly that fits Scag, 7-3/16". Replaces 48626.
SPINDLE PULLEY
Pulley only. ID taper 1-9/16" to 1-5/8". OD 5-3/4". Hgt. 7/8".
Mower-parts.net is your complete resource for quality replacement Mower Decks that fit Scag mowers as well as other Scag Mower Parts.